Micro SD card Interface module

Rs.150.00
Product Code: micro sd card moduel
Availability: In Stock
Qty:

Features:

Supports micro SD card (<=2G), micro SDHC card (<=32G) (high-speed card)
Level conversion circuit board that can interface level is 5V or 3.3V
Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
Communication interface is a standard SPI interface
4 M2 screw positioning holes for easy installation
Size: 4.1 x 2.4cm

Control Interface:

A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin.

3.3V regulator circuit:

LDO regulator output 3.3V as level converter chip, Micro SD card supply.

Level conversion circuit:

Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal

Micro SD card connector:

Positioning holes:

4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

IC Master

We deal ,all type of test equipment and integrated circuit, transistor, diode,IGBT, SMA, Connectors,  ceramic high capacitor and tantalum capacitor and other electronic components. We provide only new and original parts.

Contact us

  • +92-51-5550550
  • sales@icmasteronline.com
  • newicmaster

IC Master

IC Master 2018