Mifare MFRC522 RFID Reader/Writer

Rs.450.00
Product Code: MFRC522 RFID
Availability: In Stock
Qty:

MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.   

RFID module :
The MF522-AN module the the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader;   

Electrical parameters :
Operating current :13-26mA/DC 3.3V
Idle current :10-13mA/DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
Product physical characteristics: size: 40mm×60mm
Environmental Operating temperature: -20-80 degrees Celsius
Environmental Storage Temperature: -40-85 degrees Celsius
Relative humidity: relative humidity 5% -95%
Module interfaces SPI Parameter
Data transfer rate: maximum 10Mbit/s   

Package:
1x RFID-RC522 module
1x The standard S50 blank card
1x S50 special-shaped card (as shown by the key ring shape)

Documents

Arduino Library and example code

MFRC522 Datasheet

Aruino Wiring

   RC522 MODULE    UNO     MEGA
   SDA(SS)         D10     D53
   SCK             D13     D52
   MOSI            D11     D51
   MISO            D12     D50
   PQ              Not Connected
   GND             GND     GND
   RST             D9      D9
   3.3V            3.3V    3.3V

Datasheet for the chip that used in modules can be found at:

http://www.nxp.com/documents/data_sheet/MFRC522.pdf

Arduino MFRC522 Library from miguelbalboa at:

https://github.com/miguelbalboa/rfid

 

Using MFRC522 RFID with Arduino (Read And Write Tags )

http://makecourse.weebly.com/week10segment1.html

Using Arduino and RC522 Module as Door Unlocker (Control Relay To Unlock Door)

http://forum.arduino.cc/index.php?topic=256260

Extend RC522 Module's Receiver Range

http://forum.arduino.cc/index.php?topic=199983

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

IC Master

We deal ,all type of test equipment and integrated circuit, transistor, diode,IGBT, SMA, Connectors,  ceramic high capacitor and tantalum capacitor and other electronic components. We provide only new and original parts.

Contact us

  • +92-51-5550550
  • sales@icmasteronline.com
  • newicmaster

IC Master 2018