- Built-in TTL COM PC-PL2303HX Chip.
- Simple and Easy way to give USB support to your designs.
- Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista, Win 7.
- Standard USB type A male and TTL 4 pin connector.
Red cable ---- VCC.
Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.
After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine).
please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device.
Write a review
Note: HTML is not translated!
Rating: Bad Good